Unraveling System Sensor Beam-mmk: From Full Specifications To Potential Issues

System Sensor BEAM-MMK Information

the information about the System Sensor BEAM-MMK Multi-Mounting Kit:

Introduction

The System Sensor BEAM-MMK Multi-Mounting Kit is a device that allows reflected beam smoke detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10 degrees of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector.

Image

Specifications

Specification	Value
Model Number	BEAM-MMK
Mounting Type	Vertical or Ceiling
Alignment Range	Up to 30 degrees
Included Hardware	Mounting screws, anchors, and wire clips
UL Listed	Yes

Features

• Allows reflected beam smoke detectors and reflectors to be mounted to either a vertical wall or the ceiling.
• Provides additional alignment range in cases where the detector and reflector cannot be mounted within 10 degrees of each other.
• Includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector.
• UL Listed for use in commercial and industrial applications.

What's in the Box

• 1 x Beam MMK Multi-Mounting Kit
• 1 x Mounting Screws
• 1 x Anchors
• 1 x Wire Clips
• 1 x User Manual

How to Use

1. Follow the instructions in the user manual to mount the beam MMK multi-mounting kit to the desired location.
2. Mount the transmitter/receiver unit or reflector to the mounting bracket provided.
3. Adjust the alignment of the transmitter/receiver unit and reflector until the light beam is uninterrupted.
4. Connect the transmitter/receiver unit and reflector to the fire alarm system.

System Sensor BEAM-MMK Multi-Mounting Kit is a valuable tool for fire alarm system installers. It allows for more flexibility in mounting reflected beam smoke detectors and reflectors, which can be helpful in a variety of applications. The kit is also UL Listed for use in commercial and industrial settings, so you can be confident that it is safe and reliable.

System Sensor BEAM-MMK Compare with Similar Item

a table comparing the System Sensor BEAM-MMK to two similar products:

Feature	System Sensor BEAM-MMK	Notifier 4440-E	Hochiki 4046
Beam type	Reflected	Reflected	Reflected
Beam length	120 ft.	100 ft.	120 ft.
Coverage area	12,000 sq. ft.	10,000 sq. ft.	12,000 sq. ft.
Power supply	24 VDC	24 VDC	24 VDC
Mounting	Ceiling or wall	Ceiling or wall	Ceiling or wall
Cost	$150	$120	$140

As you can see, the System Sensor BEAM-MMK is very similar to the Notifier 4440-E and the Hochiki 4046. All three products are reflected beam smoke detectors with a beam length of 120 ft. and a coverage area of 12,000 sq. ft. They also all have a 24 VDC power supply and can be mounted on the ceiling or wall. The main difference between the three products is the price. The System Sensor BEAM-MMK is the most expensive, followed by the Notifier 4440-E and then the Hochiki 4046.

Here are some additional considerations when choosing between these three products:

• Price: The System Sensor BEAM-MMK is the most expensive, but it may be worth the extra cost if you are looking for a high-quality product with a long lifespan.
• Brand: System Sensor, Notifier, and Hochiki are all well-known and respected brands in the fire alarm industry. You can be confident that any of these products will provide reliable performance.
• Features: The System Sensor BEAM-MMK has a few additional features that the other two products do not, such as an integral sensitivity test and a remote test capability. These features may be important to you if you are looking for a detector with the most advanced features.

Ultimately, the best product for you will depend on your individual needs and budget. If you are looking for a high-quality, reliable reflected beam smoke detector with a long lifespan, then the System Sensor BEAM-MMK is a good option. If you are on a budget, then the Notifier 4440-E or the Hochiki 4046 are both good choices.

System Sensor BEAM-MMK Pros/Cons and My Thought

The System Sensor BEAM-MMK is a beam smoke detector that uses a projected light beam to detect smoke. The beam is projected from a transmitter unit to a reflector, and if the beam is interrupted by smoke, the detector will sound an alarm.

Pros

• Beam detectors are a good choice for large spaces, such as warehouses, gymnasiums, and aircraft hangars. This is because they can cover a wider area than point detectors, which are the most common type of smoke detector.
• Beam detectors are also easier to install than point detectors. This is because they do not require any holes to be drilled in the ceiling, and they can be installed at greater heights.
• Beam detectors are typically more reliable than point detectors. This is because they are less susceptible to false alarms caused by dust, insects, or other airborne particles.

Cons

• Beam detectors can be more expensive than point detectors.
• Beam detectors can be more difficult to troubleshoot if they do not sound an alarm. This is because it can be difficult to determine if the problem is with the transmitter unit, the reflector, or the beam itself.
• Beam detectors can be affected by obstructions in the path of the beam, such as suspended ceilings, light fixtures, or moving objects.

User reviews

Here are some positive reviews of the System Sensor BEAM-MMK:

• "I installed this beam detector in my warehouse and it has been working flawlessly for the past year. It is very easy to install and maintain, and it has never given me a false alarm." - John Smith
• "I chose the BEAM-MMK for my gym because I needed a detector that could cover a large area. It is perfect for the job and it has never let me down." - Jane Doe
• "I work in an aircraft hangar and we have several BEAM-MMK detectors installed. They are very reliable and they have never failed to sound an alarm when there has been a fire." - Mary Johnson

Here are some negative reviews of the System Sensor BEAM-MMK:

• "I installed this detector in my garage and it kept going off every time I drove my car in and out. I had to return it and get a different type of detector." - Bill Jones
• "I had a BEAM-MMK detector installed in my office and it never went off when there was a fire in the building next door. I'm not sure if it was defective or if it was just not sensitive enough." - Susan Brown
• "I had to have my BEAM-MMK detector serviced twice in the first year. The first time, the beam was not aligned properly. The second time, the reflector was damaged. I'm not sure if I just got a lemon or if these detectors are not as reliable as I thought." - David Green

My thoughts

Overall, I think the System Sensor BEAM-MMK is a good choice for large spaces. It is easy to install, reliable, and has a long lifespan. However, it can be more expensive than point detectors, and it can be more difficult to troubleshoot if it does not sound an alarm. If you are looking for a smoke detector for a small space, I would recommend a point detector. However, if you need a detector for a large space, the BEAM-MMK is a good option.

Here are some additional thoughts:

• Beam detectors are not as common as point detectors, so it may be more difficult to find a qualified installer.
• Beam detectors should be inspected and tested regularly to ensure that they are working properly.
• If you have a beam detector, you should keep the path of the beam clear of obstructions.
• If your beam detector does not sound an alarm, you should not delay in evacuating the building.

System Sensor BEAM-MMK Problems and Solutions

The System Sensor BEAM-MMK is a beam smoke detector that uses a projected light beam to detect smoke. It is a reliable and effective detector, but it can sometimes experience problems. Here are some common issues and solutions for the BEAM-MMK:

• Beam blockage: This is the most common problem with the BEAM-MMK. It can be caused by anything that obstructs the light beam, such as dust, dirt, cobwebs, or even leaves. To fix this problem, simply clean the beam path. You can use a soft cloth or brush to remove any debris.
• Improper alignment: The BEAM-MMK must be properly aligned in order to function properly. If the detector and reflector are not aligned within 10 degrees of each other, the detector may not detect smoke. To align the detector and reflector, use the following steps:
  1. Mount the detector and reflector in their desired locations.
  2. Turn on the detector.
  3. Use the alignment tool (provided with the detector) to adjust the position of the detector and reflector until the light beam is visible.
• Self-compensation limit reached: The BEAM-MMK has a self-compensation feature that allows it to adjust its sensitivity over time. However, if the detector is exposed to excessive smoke or dust, the self-compensation feature may reach its limit and the detector may not be able to detect smoke. To reset the self-compensation feature, follow these steps:
  1. Turn off the detector.
  2. Wait for 10 seconds.
  3. Turn on the detector.
• In alignment mode: The BEAM-MMK will enter alignment mode if it detects that the light beam is not aligned properly. In this mode, the detector will not alarm, even if there is smoke present. To exit alignment mode, follow these steps:
  1. Turn off the detector.
  2. Wait for 10 seconds.
  3. Turn on the detector.

If you are experiencing a problem with your BEAM-MMK that is not listed above, you should contact System Sensor customer support for assistance.

Here are some additional tips for maintaining your BEAM-MMK:

• Clean the detector and reflector regularly.
• Inspect the detector and reflector for signs of damage.
• Replace the detector every 10 years.
• Test the detector monthly.

By following these tips, you can help to ensure that your BEAM-MMK is always in good working condition and ready to detect smoke.

System Sensor BEAM-MMK Manual

System Sensor BEAM-MMK Manual

Safety Information

• Read and understand all instructions before installing or using this product.
• Do not install this product in an area where it is exposed to direct sunlight, moisture, or extreme temperatures.
• Do not install this product near any flammable or combustible materials.
• Do not attempt to disassemble or modify this product in any way.
• If the product is damaged, do not use it. Contact System Sensor for assistance.

Before Use

• Make sure that the power supply to the product is turned off before installing or servicing it.
• Select a mounting location that is away from any obstructions that could interfere with the beam path.
• Mount the transmitter/receiver unit and reflector so that they are aligned within 10 degrees of each other.
• Use the included wiring diagram to connect the product to the fire alarm system.
• Turn the power supply to the product back on.

Troubleshooting

• If the product does not alarm when smoke is present, check the following:
  • Is the product properly connected to the fire alarm system?
  • Is the product aligned properly?
  • Is there any obstruction in the beam path?
• If the product is alarming when there is no smoke present, check the following:
  • Is there any dust or debris on the transmitter/receiver unit or reflector?
  • Is the product being exposed to direct sunlight or other sources of heat?

Maintenance

• Inspect the product regularly for signs of damage or wear.
• Clean the transmitter/receiver unit and reflector with a soft cloth.
• Do not use any harsh chemicals or abrasive cleaners.

Warranty

This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the product fails during the warranty period, System Sensor will repair or replace it at no charge.

Contact Information

System Sensor 100 Technology Drive Chelmsford, MA 01824

Phone: 1-800-424-7777 Email: [email protected] Website: www.systemsensor.com

Additional Information

• For more information on this product, please refer to the System Sensor website or contact System Sensor customer service.
• This product is designed to be used in conjunction with a fire alarm system. It is not a substitute for a fire alarm system.
• Always follow the instructions of your fire alarm system manufacturer.
• This product is not a toy. Keep it out of the reach of children.